Configure Argonaut

Argonaut use a global configuration file that is used by all programs : /etc/argonaut.conf. This file is composed of various sections, all sections are filled with correct basic values.

Note

To function correctly Argonaut need a correclty configured /etc/ldap/ldap.conf or /etc/openldap/ldap.conf

Argonaut configuration files section

[server]

This section contains all the argonaut server parameters :

server_ip = 172.16.0.1

The ip address the server listen to. This address must match with the MAC address of argonaut server provided in FusionDirectory interface.

[client]

This section contains all the argonaut server parameters :

client_ip = 172.16.0.1

The ip address the server listen to. This address must match with the MAC address of argonaut server provided in FusionDirectory interface.

[ldap]

This section contains all the ldap parameters :

config = /etc/ldap/ldap.conf

Where is stored your ldap.conf configuration file.

dn = cn=admin,dc=fusiondirectory,dc=org

What is your bind dn.

password = secret

What is the password for the provided bind dn.

[tls]

tls = off

whether communication should be encrypted or not